This guide will help you obtain your DNA ID from your DMA card after purchasing firmware from PerfectAim.

This adds an extra layer of security by locking your firmware to your DMA card.

Prerequisites

• Order firmware from PerfectAim. You will receive an Order ID, which is required to proceed.
• If you ordered a DMA card from PerfectAim, wait for it to arrive and install it before obtaining your DMA DNA ID.
• Once your DMA card is installed and switched ON, visit https://perfectaim.io/dma/tools/ and enter your Order ID to download the required files.
• Download DMA-DNA-ID.rar on your 2ND PC, then extract all files using WinRAR or 7zip.

How to Obtain Your DNA ID

Step 1: Connect Your DMA Card

Use the provided USB-C cable to connect your DMA card’s JTAG port to your 2nd PC. The JTAG port is labeled on the card and should be the port closest to your motherboard.

Step 2: Install the JTAG Driver

Install the appropriate JTAG port driver on the 2nd PC. This depends on your DMA card model. The required drivers are found in the downloaded folder.

CH347 driver is compatible with:
PerfectAim DMA 75T, CaptainDMA 75T, StarkDMA 75T, MVP DMA, Ghost DMA, LeetDMA 35T

RS232 driver is compatible with:
CaptainDMA 35T, Screamer PCIe Squirrel 35T

(RS232 only): Run Zadig as Administrator, go to OPTIONS > Show all devices. Select your device (RS232 +HS (Interface 0)) and click Reinstall Driver.

Step 3: Run the Correct Script

Use the script that matches your driver:

• CH341PAR driver → Run the CH batch files.
• Zadig driver → Run the RS batch files.

Step 4: Retrieve Your DNA ID

Once the script runs, look for a line that says:

Copy your ID and send it to PerfectAim at the following url: https://perfectaim.io/dma/link-dna/